Product ID:COATED ABRASIVE PRODUCT--DURITE R445
MSDS Date:09/01/1988
FSC:5350
NIIN:00N035879
MSDS Number: BPWQM

Emergency Phone: 518-277-0100

Info Phone: 518-273-0100

Cage: NORTN

Telephone: 518-266-2200

Cage: 06565

10 MG/M3 TDUST; 5 MG/M3 RDUST

CAS: 409-21-2

RTECS: VW0450000

Fraction By Weight: 60%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE/CHRONIC: INHAL:MAY CAUSE
COUGHING & SHORTNESS OF BREATH. MAY AFFECT BREATHING CAPACITY.
INGEST:NO KNOWN ADVERSE EFFECTS, BUT INGESTION NOT RECOM. SKIN:NOT
ABSORBED THROUGH SKIN. MAY CAUSE ABRASI ONS. EYE:DUST MAY IRRITATE.
OTHER:DURING USE ON SOME MATLS, ELEVATED SOUND LEVELS MAY BE
CREATED WHICH AFFECT HEARING.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:REMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION AS
NEEDED. OBTAIN FIRST AID OR MEDICAL ASSISTANCE. SKIN/INGEST:OBTAIN
FIRST AID OR MEDICAL ASSISTANCE, IF NEEDED. EYE:WASH W/LARGE
AMOUNTS OF WA TER FOR AT LEAST 15 MINS. OBTAIN FIRST AID OR MEDICAL
ASSISTANCE, IF NEEDED. OTHER:OBTAIN MEDICAL ASSISTANCE.

Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE CONDITIONS
.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . BACKING & RESIN BINDER WILL BURN OR
DECOMPOSE.
Unusual Fire/Explosion Hazard:NOT APPLICABLE.

Spill Release Procedures:NORMAL CLEAN UP PROCEDURES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:HANDLE W/ADEQUATE VENTILATION. SEE
OSHA 29 CFR 1910.94 (VENT), OSHA 29 CFR 1910.1000 (AIR
CONTAMINATES), OSHA CFR 1910.213(P) SANDING MACHINES.
Other Precautions:ALSO SEE OSHA CFR 1910.243(A) (3) PORTABLE BELT
SANDING MACHINES.

Respiratory Protection:AS NEEDED, NIOSH/MSHA APPROVED DUST RESPIRATOR
OSHA 24 CFR 1910.134.
Ventilation:LOCAL EXHAUST & MECHANICAL (GENERAL) RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS NEEDED, HEARING PROTECTION-OSHA 29 CFR
1910.215 (HEARING PROTECTION).
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD:SIGNIFICANTLY GREATER THAN THE COATED ABRASIVE PRODUCT
COMPONENTS.

HCC:N1
Appearance and Odor:CLOTH COATED W/ABRASIVE MATERIAL.

Stability Indicator/Materials to Avoid:YES
NOT APPLICABLE.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:IN USE DUST & DECOMPOSING RESIN SYS
FUMES ARE GENERATED. IN MOST CASES, MATL REMOVED FROM WORK PIECE
WILL BE (SUPP DATA)

Waste Disposal Methods:STANDARD LANDFILL METHODS CONSISTENT
W/APPLICABLE FEDERAL, STATE & LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.